Tree Removal Service

Tree Removal Mapleton Utah

Tree Removal Service

Tree removal refers to the process of cutting down and removing a tree from a specific location. This can be done for a variety of reasons, such as to clear land for development, to remove a dead or diseased tree, or to improve the overall health of a forest. The process typically involves cutting down the tree using specialized equipment and then removing the stump and debris from the area. Tree removal can be dangerous and should only be done by trained professionals.

Tree removal, also known as tree cutting, is the process of cutting down and removing a tree from a specific location. This can be done for a variety of reasons, such as to clear land for development, to remove a dead or diseased tree, or to improve the overall health of a forest.

The process typically begins with an assessment of the tree, including factors such as its size, location, and condition. Based on this assessment, a plan is created for how the tree will be removed. The tree is then cut down using specialized equipment such as chainsaws, felling wedges, and tree-climbing gear. The tree cutter will carefully cut the tree in a way that will minimize damage to surrounding property and minimize the risk of injury to themselves and others.

After the tree is cut down, the stump is typically removed using a stump grinder. This is a machine that grinds the stump into small pieces, allowing for easy removal and disposal. The debris from the tree, including branches and leaves, is also removed from the area.
Tree removal can be dangerous and should only be done by trained professionals. Tree cutting requires knowledge of tree biology, safety and proper use of equipment and knowledge of local laws and regulations. Improper tree removal can lead to damage to property and injury to people.

Additionally, tree removal can have a significant impact on the environment and it is important to consider the ecological effects of removing a tree. For example, removing a mature tree can have a negative impact on local wildlife, and removing a tree with a large canopy can affect the microclimate of the area.

Therefore, it is important to consider the reasons for removing a tree and weigh the potential benefits and drawbacks before proceeding with the removal. In some cases, it may be more appropriate to preserve the tree or consider other options such as pruning or cabling.
Tree removal can be a complex process that requires careful consideration of several factors, including the health and condition of the tree, its location, and any potential hazards or risks it may pose. In some cases, a tree may need to be removed due to disease or damage, while in other cases it may simply be in the way of construction or other development.

Before removing a tree, it is important to consult with a certified arborist who can assess the tree’s condition and determine whether or not it is safe to remove. If the tree is determined to be a hazard, it may need to be removed as soon as possible. If the tree is healthy, it may be possible to save it through pruning or other means.

When removing a tree, it is important to use proper techniques and equipment to ensure that the tree is taken down safely and without causing damage to surrounding property. This may include using a crane or other specialized equipment to remove the tree in sections, or using a tree spade to dig up the tree and transplant it elsewhere.

After the tree is removed, it is important to properly dispose of the debris, which may include chipping or mulching the wood, or taking it to a landfill. Additionally, it is important to consider what will be planted in place of the removed tree, as well as the overall impact on the surrounding ecosystem.

Overall, tree removal is a serious decision that should not be taken lightly. It is important to consult with professionals, consider the potential risks and benefits, and have a plan in place for removing the tree safely and responsibly.

Tree Removal Services, Relocation and Stump Grinding

Another reason for tree removal services professionals is when you want to transfer a tree from one location to another. Let us say you want to bring with you your tree from your old home to your new home. This is possible but only the experts can handle this job. A lot of homeowners do this project on their own and end up with two things: dead tree or injured owner. To avoid these two concerns, you have to let the specialists handle the relocation.

Another service called stump grinding is also a job for tree removal services companies. There are times when old trees fall or you may have managed to cut your true but the stump and the roots are still embedded. This cannot be removed in one, two or more sessions. You need skilled people to grind the stump and make the lot area plantable by another tree and some plants once again.

Do it yourself approach. You can count on your own means/resources by seeking the help of your husband, other family members, and friends. You probably have a friend who has a chainsaw, a truck that lift tree limbs, and other equipment that can be used in removing trees.

If the tree is over power lines, you can ask for a tree removal service from power line companies and they will do the job for you.
Seek the help of your municipality. Your municipal can provide you a free tree removal service courtesy of the municipal government itself.

Advertise a tree removal in the paper. There could be somebody out there that can get rid the tree for you and take the tree for himself.

Seek the help of a logger. Your local area will probably have loggers who are willing to do the tree removal for you.
Trees can be described as a blessing. It provides beauty to your property, shade against sunlight and cool air especially during summer. Trees are also valuable to the environment. That is why laws have been created against unnecessary tree cutting.

Environmentalists continue to support illegal tree removal.

Ornamental trees add magnificence to your landscape Nonetheless, it is necessary to cut down trees under several circumstances. Trees that have wasted should be taken away from your property. It may also be necessary to prune trees if these attract unwanted animals or rodents to your homes. Dead leaves, sticks and larger boughs that have rotted can cause a lot of inconvenience to you. The roots of trees can cause crevices in the flooring and walls. It can destroy or damage pipelines and other utilities.

Trees that grow too high may stretch towards electrical cables and cause problems. Tree branches can also obstruct views. In short, tree removal is needed when these situations occur. Homeowners may be compelled to take away trees to make way for a particular construction project. You have the option to cut down unwanted trees provided you have the expertise and equipment. Otherwise, get the services of professional tree removal services. These companies will give the service you like for a minimal cost.

The process of cutting trees is a complicated task. It has to be carried out by professionals who can cut down trees without destroying any structures. The task is more dangerous if the trees stand near electrical posts and wires. Trees located near edifices and fences are not easy to remove while those located in open spaces are easier to remove. Costs depend on the tallness, thickness, form and quantity of branches.

Expert cutters know how to take care of cutting timber. These service providers do not simply cut a tree without a plan. Measurements have to be taken at the start so that the falling log does not hit any person, house, vehicle or electric post and wires. Trees should be cut at the correct angle so it goes down on the proper direction.

Stump removal is also difficult. It calls for the work of experts to avoid damages. Tree cutting services know how to operate complicated gear such as cranes, special ladders and ropes. These people also consider the safety factor and disease control aspects so you can be assured of a complete service even if you have to spend some money.

Picking the Right Professionals

Look for crews with ample experience in years, with valid certifications and proper studies. Check for customer feedbacks and those people who were satisfied by their work. Compare prices between companies on top of the mentioned requisites of these tree removal services companies. Then, pick the right group for your needs.

At times a tree removal service is needed to prevent injuries from broken trees. If you think your home needs a hazardous tree removal service don’t wait until it’s too late. Contact your local tree care professionals today to learn more about tree care and how it affects your home.

Salt Lake City, Utah

About Salt Lake City, Utah

Salt Lake City is the capital and most populous city of Utah, United States. It is the seat of Salt Lake County, the most populous county in Utah. With a population of 200,133 in 2020, the city is the core of the Salt Lake City metropolitan area, which had a population of 1,257,936 at the 2020 census. Salt Lake City is further situated within a larger metropolis known as the Salt Lake City–Ogden–Provo Combined Statistical Area, a corridor of contiguous urban and suburban development stretched along a 120-mile (190 km) segment of the Wasatch Front, comprising a population of 2,746,164, making it the 22nd largest in the nation. It is also the central core of the larger of only two major urban areas located within the Great Basin.

Bus Stops in Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Greyhound: Bus Station Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Salt Lake Central Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Greyhound: Bus Stop Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Stadium Station (EB) Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in South Salt Lake City Station Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in 2100 S / 700 E (WB) Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Salt Lake Central Station (Bay A) Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in 200 S / 1000 E (EB) Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in South Salt Lake City Station Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in 900 E / Wilson Ave (SB) Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Us Hwy 89 @ 270 S (N. Salt Lake) Salt Lake City, Utah to Truco Services, Inc.

Bus Stop in Courthouse Station Salt Lake City, Utah to Truco Services, Inc.

Map of Salt Lake City, Utah

Driving Directions in Salt Lake City, Utah to Truco Services, Inc.

Driving Directions from Hidden Oak Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from A Swedin Tree Expert to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Atlas Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Diamond Tree Experts to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Arbor+ to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Integrated Tree Professionals to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Urban Oaks Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Greenlite Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Heritage Tree Experts to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Arborcare-Arborscape, Inc. to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Arbornauts Tree Experts to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Amen Trees to 4640 Commerce Dr, Murray, UT 84107, USA

Reviews for Truco Services, Inc. Salt Lake City, Utah

Truco Services, Inc. Reviews

Marissa Burton

starstarstarstarstar (5)

TruCo is a great company to work with for your commercial landscaping and snow removal needs! Rob is excellent to work with. He is very timely in providing quotes and has a lot of great feedback and suggestions to provide on what will look great, fit within your budget, and is knowledgeable on plants that will thrive with Utah's ever changing weather conditions. I have been impressed with TruCo's landscape maintenance as well as landscape projects which have had a quick turnaround time. I would highly recommend using TruCo!

Truco Services, Inc. Reviews

Yvonne Olson

starstarstarstarstar (5)

I experienced excellent all around service from landscape improvement design, scheduling and professional installation completed within the timeline we discussed. Rob, the manager does an excellent job of communicating, overseeing the install crew and making sure his customers are 100% satisfied with the job. Highly recommend TruCo for all landscaping needs.

Truco Services, Inc. Reviews

Raymond Ferraro

starstarstarstarstar (5)

Michael the tree guy is so smart.  He knows all about tree removal, cutting and tree trimming services.  Truco did amazing work for me.  We had 16 very old and mature trees removed. The Truco team showed up on time ready to get the job done.  They did amazing with clean up truly respect your property and your life.  Communication was really good.  They needed to move some things to get the stump grinder to our yard they put things back with no issues.  Extremely professional and truly know what they're doing.  If anyone is looking for professional tree removal or tree service you really should call Jason or Michael at Truco.

Truco Services, Inc. Reviews

Heather Whiting

starstarstarstarstar (5)

We hired TruCo to do a new install of sprinklers, sod, spigot, and bury downspouts. We even have a wifi transmitter for our control box we can access from an app on our phones! We absolutely love the professionalism and quality of their work!! Our sales rep Pete was the best to work with, we highly recommend him to anyone in the market for landscaping. It was awesome seeing the finished results and we're incredibly excited to enjoy our new space!

Truco Services, Inc. Reviews

Jan Merideth

starstarstarstarstar (5)

TruCo installed all of our plants, trees and shrubs, drip lines, and boulders. Then they installed our amazing beautiful firepit. We loved the results and they guarantee all plants and trees up to a year. They were great and easy to work with. They listened to our needs and wants and met them 100%. Our HOA sent us a letter telling us they appreciate all the work and the way our yard looks and let us know we added value to the property. Win/Win

Tree Removal Service Near Me

 Tree Removal Service Near Me

Tree Removal Service Near Me

How to get rid of tree stumps is one of the most frequently asked question in the industry. Once you have had a tree removed you are left with a typically unsightly reminder, the stump. Tree stumps are an eyesore, a tripping hazard, and they can attract unwanted pests like termites or even fungi and bacteria. If left to simply decay and rot away on its own, without any sort of treatment, a stump can take up to ten years to disappear. When it comes to rotting a tree stump in Utah, the rate of decay depends on many different factors such as species of tree, size of the tree, and the climate and weather conditions.

As your leading Utah arborist, we do stump grinding in the Utah and surrounding area, although due to the demand we do have to limit our grinding services and can only offer it to current tree service clients and not as a standalone service.

To remove a tree stump you can try to tackle the job yourself, although stump grinders are quite heavy and can be difficult to use at times. So how do you get rid of a tree stump then? What is the best way? Well, the answer is in the original suggestion of letting it rot away, but doing so quickly.

How To Get Rid Of A Tree Stump Fast?

The fastest way to remove a tree stump, with and without using a grinder, is the chemical method. By applying chemicals to holes drilled into the stump, you speed up the natural decay process and the remaining tree fibers and roots will break down much more quickly. It is considered one of the best ways to remove a tree stump from your yard. Here is how to use this method by following these steps.

DIY Steps To Rotting A Tree Stump From A Leading Arborist:
Begin on a dry day or after a number of dry days if possible. This way the tree stump will be looking for liquid and nutrients and will soak up the chemicals faster.

If you are capable, use a chainsaw to cut the remaining part of the tree as close to the ground as possible. By doing this the chemicals will have less material to eat through. Chainsaws can be dangerous though, so make sure you always use caution, wear steel-toed boots and eye protection.

Once the tree stump is as close to the ground as you can comfortably get it to go, drill a number of holes into the top of the stump and along the sides in a downward direction. The bigger the drill bit the better, and each of the holes should be a few inches deep.
After drilling the holes into the stump in different places, you will apply the chemicals that will break down the remaining wood.

Utah does have strict legal restrictions about the kind of chemicals you can purchase for this sort of project. Ideally, you would want a commercial fertilizer that is high in nitrogen, since it will give you the fastest results, but cow manure is also effective. Another more natural alternative is Epsom salt. It is also a cost-effective solution as a 19lbs page starts at $10. It has similar dissolving properties to nitrogen but is a more organic approach. When you have chosen the chemical you will use, pack the holes with as much of it as you can.

Then soak the ground around the stump and wet the top and sides of the stump. After the stump is wet, cover it with a plastic tarp to trap the moisture around the stump. Moisture is ultimately what will help the chemicals break down the wood particles faster.
The next step is to apply mulch over the top of the plastic tarp. Organic mulch, like hay or tree bark, is best for this task as it will retain more moisture and help to keep the tarp in place.

You can use rocks and stones to weigh down the tarp further to help keep it in place, although this step is considered optional.
Once you have completed all of these steps, you are officially rotting a tree stump. This process is a speeding up of nature, and we all know that nature can take its time, so you should expect that it will take some time to work. How can you speed up the stump rot process even more? You can repeat the rotting steps periodically if you notice the mulch has grown dry.

How Much Does It Cost To Remove A Stump?

The overall cost for a stump removal is largely dependent on the method you choose to use. If you chose to do it yourself, it would be the cost of materials needed. Whereas, if you live in the nearby Utah area, with easy access to the stump, the average cost is about $6 per inch in diameter with $150-$200 minimum charge.

Looking To Remove a Tree Stump Quickly?

Ultimately, the quickest way to remove your tree stump and return your yard to a flat surface is the method of stump grinding. Although our grinding services are limited, if you are in need of a tree removal service in the Utah, area, or if you are looking to get some stumps removed don’t hesitate to contact the tree experts.

If you’re not a current or past tree client and have a stump you’d like removed, read more about stump rot and how to safely remove the tree stump yourself.

When your stump is ground, you can expect that there will be no masses of the stump left underground. The stump grindings, which are the wood shavings from the stump mixed with dirt, are left behind. You can use these grindings as mulch around your yard. Please remove the grindings prior to replanting any plants or trees in that area.

Stump Grinding FAQs

What is the average cost for stump grinding?

If you live in the nearby Utah Metro area with easy access to the stump, stump grinding cost averages about $6 per inch in diameter with a $150-$200 minimum. Anything that makes the stump harder to access and remove such as a fence or retaining wall or anything breakable such as a flagstone patio would increase the price from there. Also removing the stump grindings is almost always an additional charge.

Is It better to grind a stump or remove it?

There are many ways how to get rid of tree stumps, and there are advantages and disadvantages for either removing a stump or grinding it. For removing a stump the advantage is there is no stump grinding left behind. The disadvantages are that removing all but the smallest stumps usually requires large equipment such as a loader or excavator. In addition, it is usually pretty hard to find a place to dispose of them. For grinding a stump the advantages are that it can be done to almost any stump in any location or a reasonable fee and the disadvantages are that the grinding as usually left behind for the property owner to deal with.

Can you grind down a tree stump with a chainsaw?

There are stump grinders that attach to a chainsaws powerhead, but grinding a stump with a regular chainsaw would be exceptionally difficult as the chain would dull every time it hit even a small amount of dirt. It also sounds very dangerous.

Can I use ground up tree stump as mulch?

Yes, a ground-up tree stump makes an excellent mulch product.

How much does it cost to rent a stump grinder from Home Depot?

In the Utah Metro area $299 per day and $209 for 4 hours as of 3/20/19 to rent a grinder for stump removal in Utah, OR.

Does stump grinding kill roots?

No, in fact, the roots are sometimes spurred to grow more from the shock of having the tree removed and stump ground out.

Does tree removal include the stump?

The answer is almost always no. The removal of the stump in the ground is for an additional fee. Tree removal bids are very specific so any extra services such as stump grinding, wood removal, or tree removal permits are not included unless expressly stated.

Will tree stumps attract termites?

Yes, but not all termites will damage your home. It will take an exterminator to determine which kind you have should your stump become infested.

Can a tree grow back from a stump?

Depending on the type of tree they can grow back but this would not be a tree that you would want to keep as its structure would be compromised and thus it would be likely to fail and damage your property.

Contact the tree experts about stump removal in Utah

If you live in the Utah area and are looking to have a tree removed and are also interested in stump removal and grinding contact our nearby team of Utah stump grinding service professionals.

West Valley City, Utah

About West Valley City, Utah

West Valley City is a city in Salt Lake County and a suburb of Salt Lake City in the U.S. state of Utah. The population was 140,230 at the 2020 census, making it the second-largest city in Utah. The city incorporated in 1980 from a large, quickly growing unincorporated area, combining the four communities of Granger, Hunter, Chesterfield, and Redwood. It is home to the Maverik Center and USANA Amphitheatre.

Bus Stops in West Valley City, Utah to Truco Services, Inc.

Bus Stop in West valley central bus station West Valley City, Utah to Truco Services, Inc.

Bus Stop in 3100 S @ 4450 W West Valley City, Utah to Truco Services, Inc.

Bus Stop in 3500 S / 3900 w (EB) West Valley City, Utah to Truco Services, Inc.

Bus Stop in 3500 S / 4800 w (WB) West Valley City, Utah to Truco Services, Inc.

Bus Stop in West Valley Central Station (Bay F) West Valley City, Utah to Truco Services, Inc.

Bus Stop in 5600 w @ 4998 S West Valley City, Utah to Truco Services, Inc.

Bus Stop in 3100 S @ 3061 W West Valley City, Utah to Truco Services, Inc.

Bus Stop in 5600 w @ 4500 S West Valley City, Utah to Truco Services, Inc.

Bus Stop in 4000 w @ 3535 S West Valley City, Utah to Truco Services, Inc.

Bus Stop in West Valley Central Station (Bay G) West Valley City, Utah to Truco Services, Inc.

Bus Stop in 3100 S @ 3596 W West Valley City, Utah to Truco Services, Inc.

Bus Stop in 3650 S / 3100 w (EB) West Valley City, Utah to Truco Services, Inc.

Map of West Valley City, Utah

Driving Directions in West Valley City, Utah to Truco Services, Inc.

Driving Directions from Arbor+ to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Integrated Tree Professionals to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Diamond Tree Experts to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from A Dutchman Tree Care LLC to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Atlas Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Hidden Oak Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Amen Trees to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from A Swedin Tree Expert to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Greenlite Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from chainsawyer tree trimming to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Tim's Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Woodruff Tree Trimming and Removal to 4640 Commerce Dr, Murray, UT 84107, USA

Reviews for Truco Services, Inc. West Valley City, Utah

Truco Services, Inc. Reviews

Marissa Burton

starstarstarstarstar (5)

TruCo is a great company to work with for your commercial landscaping and snow removal needs! Rob is excellent to work with. He is very timely in providing quotes and has a lot of great feedback and suggestions to provide on what will look great, fit within your budget, and is knowledgeable on plants that will thrive with Utah's ever changing weather conditions. I have been impressed with TruCo's landscape maintenance as well as landscape projects which have had a quick turnaround time. I would highly recommend using TruCo!

Truco Services, Inc. Reviews

Yvonne Olson

starstarstarstarstar (5)

I experienced excellent all around service from landscape improvement design, scheduling and professional installation completed within the timeline we discussed. Rob, the manager does an excellent job of communicating, overseeing the install crew and making sure his customers are 100% satisfied with the job. Highly recommend TruCo for all landscaping needs.

Truco Services, Inc. Reviews

Raymond Ferraro

starstarstarstarstar (5)

Michael the tree guy is so smart.  He knows all about tree removal, cutting and tree trimming services.  Truco did amazing work for me.  We had 16 very old and mature trees removed. The Truco team showed up on time ready to get the job done.  They did amazing with clean up truly respect your property and your life.  Communication was really good.  They needed to move some things to get the stump grinder to our yard they put things back with no issues.  Extremely professional and truly know what they're doing.  If anyone is looking for professional tree removal or tree service you really should call Jason or Michael at Truco.

Truco Services, Inc. Reviews

Heather Whiting

starstarstarstarstar (5)

We hired TruCo to do a new install of sprinklers, sod, spigot, and bury downspouts. We even have a wifi transmitter for our control box we can access from an app on our phones! We absolutely love the professionalism and quality of their work!! Our sales rep Pete was the best to work with, we highly recommend him to anyone in the market for landscaping. It was awesome seeing the finished results and we're incredibly excited to enjoy our new space!

Truco Services, Inc. Reviews

Jan Merideth

starstarstarstarstar (5)

TruCo installed all of our plants, trees and shrubs, drip lines, and boulders. Then they installed our amazing beautiful firepit. We loved the results and they guarantee all plants and trees up to a year. They were great and easy to work with. They listened to our needs and wants and met them 100%. Our HOA sent us a letter telling us they appreciate all the work and the way our yard looks and let us know we added value to the property. Win/Win

Tree Cutting Services

Tree Cutting Services

A feller buncher is a type of harvester used in logging. It is a motorized vehicle with an attachment that ca

n rapidly gather and cut a tree before felling it.

Feller is a traditional name for someone who cuts down trees, and bunching is the skidding and assembly of two or more trees. A feller buncher performs both of these harvesting functions and consists of a standard heavy equipment base with a tree-grabbing device furnished with a chain-saw, circular saw or a shear—a pinching device designed to cut small trees off at the base. The machine then places the cut tree on a stack suitable for a skidder, forwarder, or yarder for transport to further processing such as delimbing, bucking, loading, or chipping.

Some wheeled feller bunchers lack an articulated arm, and must drive close to a tree to grasp it.

In cut-to-length logging a harvester performs the tasks of a feller buncher and additionally does delimbing and bucking.

Components and Felling attachment

Feller buncher is either tracked or wheeled and has self-levelling cabin and matches with different felling heads. For steep terrain, tracked feller buncher is being used because it provides high level of traction to the steep slope and also has high level of stability. For flat terrain, wheeled feller buncher is more efficient compared to tracked feller buncher. It is common that levelling cabins are matched with both wheeled and tracked feller buncher for steep terrain as it provides operator comfort and helps keeping the standard of tree felling production. The size and type of trees determine which type of felling heads being used.

Types of felling heads

Disc Saw Head – It can provide a high speed of cutting when the head is pushed against the tree. Then, the clamp arms will hold the tree when the tree is almost completed cutting. It is able to cut and gather multiple trees in the felling head. The disc saw head with good ground speed could provide high production which allows it to keep more than one skidders working continuously.

Shear Blade Head – It is placed against the tree and the clamp arms will hold the tree firmly. Then, the blade will activate and start cutting the tree. Same as disc saw head, it can hold multiple trees before they are placed on the ground.

Chain Saw Head – The floppy head provides minimal control to place the trees on the ground. It might not suit to collect the cut trees or gather the cut stems in the felling head.

Productivity

Comparing other harvesting systems such as chainsaw and harvester, feller buncher has the relatively high productivity among them. The weekly production of the feller buncher was 627 cubic meters of usable logs, while the chainsaw system and harvester system could produce 163 cubic meters and 239 cubic meters respectively. There are several factors affecting the level of productivity of the feller buncher. They include characteristics of stand, terrain conditions, operation location, and the performance of the operator. Many studies indicated that the trees size and the gradient of the slope are the major factors impacting the overall productivity. There was a research suggested that productivity has a significant positive relationship with the tree size which means the larger stem size, larger tree height or larger diameter at breast height (DBH) results in a high productivity of the feller buncher. Terrain conditions such as ground slope and terrain roughness have a significant negative relationship to the productivity of feller buncher which means the steeper of the land or rough terrain condition can bring negative effect to the productivity. One of the studies had found that feller buncher might reduce its productivity when performing operation on a very uneven surface with slopes of more than 20%. However, larger tree size does not necessarily lead to high productivity. The same study compared the operation time when performing clear-cut of the stands with two different average DBH, 24.6 cm and 34.3 cm respectively. Result showed that the productivity when operating the second stand decreased by 32.3% because the time consumption was doubled when larger stands required two-stage of cutting operation.

Cost-effectiveness

The purchase cost of a feller buncher is around $180,000 and its fuel consumption and lubricant consumption is high among other mechanical harvesting equipment. The feller buncher also has the highest hourly cost which is around $99.5 when comparing other equipment such as a harvesters and grapple skidders. Although the total cost of feller buncher is high in overall, the unit production price is the lowest which explains why feller buncher is considered the most cost-effective harvesting equipment. The average unit cost of the feller buncher is $12.1/m3 while the unit cost of the harvesters is $16.5/m3. The unit cost of the feller buncher is primary affected by the tree size and the tree volume. The unit felling cost is lower when the tree size increased. For example, tree with 5 inches at DBH has the unit cost of $70 while tree with 15 inches at DBH has the unit cost of $12. As the cost of feller buncher is high, only large tree volume can produce more profit to cover the high average cost. In terms of stump height, lower stump height can maximise the use of natural resources and prevent wood waste. Mechanical felling such as using feller buncher can prevent 30% of value loss caused by the high stumps.

Maintenance

Feller buncher requires daily maintenance before operation and some components only require periodic maintenance. It could ensure the safety of operators and all the workers around the operation. If damaged or faulty machine is operated, it could result in further damage to the machine which can be more expensive to repair.

Daily or Every 8 hours

Modern style Tigercat feller buncher. Commonly referred to as a tree cutter

Lubrication

The felling head is considered one of the hardest part of the feller buncher and it is necessary to apply lubricant to every joint for daily maintenance. It is suggested to apply lubricant to saw head clamps, wrist attachment and driveshaft bearings during every maintenance. The use of grease should meet the extreme pressure performance standard and contains 3% of molybdenum disulphide (MoS2).

MoS2 can prevent the wear takes place where the metal to metal contact exists.

Fuel

It is also important to check if there is enough fuel for the operation. Feller bunchers use diesel fuel to generate power. In most of the cases, the fuel is preferably to have cetane number greater than 50 (minimum 40). This is suitable when undergo operation for temperature below -20 °C (-4 °F) or elevations more than 1500m (5000 Ft.). The Cloud Point of the fuel is preferably at least 5 °C (9 °F) lower than the expected low temperature. It is also suggested that the sulphur content of the fuel should not be more than 0.5% as it could reduce 50% of the service interval for the engine oil and filter.

Older style felling head that uses a bar and chain to cut trees instead of the more modern saw disk.

Engine coolant

Operators have the responsibility to check the engine coolant level of the feller buncher before starting the engine. The coolant prevents cylinder linear erosion and pitting, and provides protection during extremely low temperature for up to -37 °C (-34 °F). It is recommended to use coolants for heavy-duty engines which are relatively low silicate ethylene glycol base. There are two forms of coolants: pre-diluted or concentrate. Water is required to dilute the concentrated coolant with an approximate ratio of 50:50. The use of supplemental coolant addictive might be also required in the concentrated coolant in order to provide protection against corrosion. Distilled, deionised, or demineralised water is suggested for mixing the concentrated coolant because when some water compositions mix with other substances could form a precipitate, causing damage or blockage in the engine.

Risk management approach

During maintenance, there are common working hazards related to two main areas: working environment and exhaust system. When working on the exhaust system, be aware of the hot components around the engine. Workers could wear personal protective equipment such as safety spectacles, heat-proof gloves and safety boots. When feller buncher is elevated for service or maintenance, falls from height might happen. Related injuries could be avoided by ensuring dryness of all the walking surface, wiping any oils or other liquid substances on the floor. Also, ensure the feller buncher is parked on a level and stable ground during maintenance. When getting in and out of the machinery, workers are suggested to use three point of contact with two hands holding the handrails and one foot on a step. It is also important to provide sufficient lighting for all the working sites at all time of service.

Safety

Logging is considered one of the most dangerous occupations. This is because many loggers are injured by the falling objects which are large in size and heavy. “Struck by object” is the most common injuries that reported in the logging industry due to the manual use of equipment during the logging procedures. There is evidence that using mechanized harvesting equipment could reduce the rate of “struck by” injuries. One study indicates that total injury claims could be reduced by 14.2%, while the “struck by” injuries could be reduced by 8.2%, when comparing the changes before and after the use of feller buncher. The significant decline in the number of “struck by” injuries after using the feller buncher in the logging companies supported the statement that using mechanized harvesting equipment could lessen overall injuries. The evidence also found that the rate of injuries in the logging companies without using feller bunchers had increased slightly throughout a period of time, increasing from 14.5% to 17.5%, in five years. In terms of trees fatality, areas with lower levels of mechanization in harvesting resulted in higher rate of trees fatality. For instance, in Eastern areas of the United States, research which compared the conventional and mechanized logging operations, indicated the number of injuries, when using the conventional approach, is three times greater than that of using the mechanized equipment such as a feller buncher. However, mechanized related injury could be raised accordingly, especially when performing machine maintenance or repair. These kinds of injuries could be serious and also costly.

Midvale, Utah

About Midvale, Utah

Midvale is a city in Salt Lake County, Utah, United States. It is part of the Salt Lake City, Utah Metropolitan Statistical Area. Midvale's population was 34,124 according to 2019 estimates from the U.S. Census Bureau.

Bus Stops in Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Fort Union Station Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Center Station (Bay B) Midvale, Utah to Truco Services, Inc.

Bus Stop in 8600 S @ 171 W Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Fort Union Station Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Main St / Fern St (NB) Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Main St / Wasatch St (SB) Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Main St / Center St (SB) Midvale, Utah to Truco Services, Inc.

Bus Stop in 7200 S @ 320 W Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Center St / Holden St (EB) Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Main St / Heather St (SB) Midvale, Utah to Truco Services, Inc.

Bus Stop in Midvale Main St / Price St (NB) Midvale, Utah to Truco Services, Inc.

Map of Midvale, Utah

Driving Directions in Midvale, Utah to Truco Services, Inc.

Driving Directions from Tim's Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Discount Tree & Landscape Co to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Art Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Utah Tree Co to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Golden Leaf Tree Experts to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from A Cut Above Tree Preservation to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from High Climbers Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Immaculate Yard & Tree to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Excellence Tree & Landscape to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Tree Pro-Tech to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Amen Trees to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Woodruff Tree Trimming and Removal to 4640 Commerce Dr, Murray, UT 84107, USA

Reviews for Truco Services, Inc. Midvale, Utah

Truco Services, Inc. Reviews

Marissa Burton

starstarstarstarstar (5)

TruCo is a great company to work with for your commercial landscaping and snow removal needs! Rob is excellent to work with. He is very timely in providing quotes and has a lot of great feedback and suggestions to provide on what will look great, fit within your budget, and is knowledgeable on plants that will thrive with Utah's ever changing weather conditions. I have been impressed with TruCo's landscape maintenance as well as landscape projects which have had a quick turnaround time. I would highly recommend using TruCo!

Truco Services, Inc. Reviews

Yvonne Olson

starstarstarstarstar (5)

I experienced excellent all around service from landscape improvement design, scheduling and professional installation completed within the timeline we discussed. Rob, the manager does an excellent job of communicating, overseeing the install crew and making sure his customers are 100% satisfied with the job. Highly recommend TruCo for all landscaping needs.

Truco Services, Inc. Reviews

Heather Whiting

starstarstarstarstar (5)

We hired TruCo to do a new install of sprinklers, sod, spigot, and bury downspouts. We even have a wifi transmitter for our control box we can access from an app on our phones! We absolutely love the professionalism and quality of their work!! Our sales rep Pete was the best to work with, we highly recommend him to anyone in the market for landscaping. It was awesome seeing the finished results and we're incredibly excited to enjoy our new space!

Truco Services, Inc. Reviews

Jan Merideth

starstarstarstarstar (5)

TruCo installed all of our plants, trees and shrubs, drip lines, and boulders. Then they installed our amazing beautiful firepit. We loved the results and they guarantee all plants and trees up to a year. They were great and easy to work with. They listened to our needs and wants and met them 100%. Our HOA sent us a letter telling us they appreciate all the work and the way our yard looks and let us know we added value to the property. Win/Win

Truco Services, Inc. Reviews

Michael Sorensen

starstarstarstarstar (1)

Avoid working for this company. They will promise you things to get you in, then tell you there is no documentation about said things. Extremely unprofessional. Update to response - please dont try to justify. PTO was promised by the hiring manager on day 1 due to the conditions. Your company refusing to honor the agreement and tell me that there is no documentation is the problem. I quit after being told that you would not honor the PTO, not before.

Tree Cutting Service Near Me

Tree Cutting Service Near Me

A feller buncher is a type of harvester used in logging. It is a motorized vehicle with an attachment that can rapidly gather and cut a tree before felling it.

Feller is a traditional name for someone who cuts down trees, and bunching is the skidding and assembly of two or more trees. A feller buncher performs both of these harvesting functions and consists of a standard heavy equipment base with a tree-grabbing device furnished with a chain-saw, circular saw or a shear—a pinching device designed to cut small trees off at the base. The machine then places the cut tree on a stack suitable for a skidder, forwarder, or yarder for transport to further processing such as delimbing, bucking, loading, or chipping.

Some wheeled feller bunchers lack an articulated arm, and must drive close to a tree to grasp it.

In cut-to-length logging a harvester performs the tasks of a feller buncher and additionally does delimbing and bucking.

Components and Felling attachment

Feller buncher is either tracked or wheeled and has self-levelling cabin and matches with different felling heads. For steep terrain, tracked feller buncher is being used because it provides high level of traction to the steep slope and also has high level of stability. For flat terrain, wheeled feller buncher is more efficient compared to tracked feller buncher. It is common that levelling cabins are matched with both wheeled and tracked feller buncher for steep terrain as it provides operator comfort and helps keeping the standard of tree felling production. The size and type of trees determine which type of felling heads being used.

Types of felling heads

Disc Saw Head – It can provide a high speed of cutting when the head is pushed against the tree. Then, the clamp arms will hold the tree when the tree is almost completed cutting. It is able to cut and gather multiple trees in the felling head. The disc saw head with good ground speed could provide high production which allows it to keep more than one skidders working continuously.
Shear Blade Head – It is placed against the tree and the clamp arms will hold the tree firmly. Then, the blade will activate and start cutting the tree. Same as disc saw head, it can hold multiple trees before they are placed on the ground.
Chain Saw Head – The floppy head provides minimal control to place the trees on the ground. It might not suit to collect the cut trees or gather the cut stems in the felling head.

Productivity

Comparing other harvesting systems such as chainsaw and harvester, feller buncher has the relatively high productivity among them. The weekly production of the feller buncher was 627 cubic meters of usable logs, while the chainsaw system and harvester system could produce 163 cubic meters and 239 cubic meters respectively. There are several factors affecting the level of productivity of the feller buncher. They include characteristics of stand, terrain conditions, operation location, and the performance of the operator. Many studies indicated that the trees size and the gradient of the slope are the major factors impacting the overall productivity. There was a research suggested that productivity has a significant positive relationship with the tree size which means the larger stem size, larger tree height or larger diameter at breast height (DBH) results in a high productivity of the feller buncher. Terrain conditions such as ground slope and terrain roughness have a significant negative relationship to the productivity of feller buncher which means the steeper of the land or rough terrain condition can bring negative effect to the productivity. One of the studies had found that feller buncher might reduce its productivity when performing operation on a very uneven surface with slopes of more than 20%. However, larger tree size does not necessarily lead to high productivity. The same study compared the operation time when performing clear-cut of the stands with two different average DBH, 24.6 cm and 34.3 cm respectively. Result showed that the productivity when operating the second stand decreased by 32.3% because the time consumption was doubled when larger stands required two-stage of cutting operation.

Cost-effectiveness

The purchase cost of a feller buncher is around $180,000 and its fuel consumption and lubricant consumption is high among other mechanical harvesting equipment. The feller buncher also has the highest hourly cost which is around $99.5 when comparing other equipment such as a harvesters and grapple skidders. Although the total cost of feller buncher is high in overall, the unit production price is the lowest which explains why feller buncher is considered the most cost-effective harvesting equipment. The average unit cost of the feller buncher is $12.1/m3 while the unit cost of the harvesters is $16.5/m3. The unit cost of the feller buncher is primary affected by the tree size and the tree volume. The unit felling cost is lower when the tree size increased. For example, tree with 5 inches at DBH has the unit cost of $70 while tree with 15 inches at DBH has the unit cost of $12. As the cost of feller buncher is high, only large tree volume can produce more profit to cover the high average cost. In terms of stump height, lower stump height can maximise the use of natural resources and prevent wood waste. Mechanical felling such as using feller buncher can prevent 30% of value loss caused by the high stumps.

Maintenance

Feller buncher requires daily maintenance before operation and some components only require periodic maintenance. It could ensure the safety of operators and all the workers around the operation. If damaged or faulty machine is operated, it could result in further damage to the machine which can be more expensive to repair.

Daily or Every 8 hours

Modern style Tigercat feller buncher. Commonly referred to as a tree cutter.

Lubrication

The felling head is considered one of the hardest part of the feller buncher and it is necessary to apply lubricant to every joint for daily maintenance. It is suggested to apply lubricant to saw head clamps, wrist attachment and driveshaft bearings during every maintenance. The use of grease should meet the extreme pressure performance standard and contains 3% of molybdenum disulphide (MoS2). MoS2 can prevent the wear takes place where the metal to metal contact exists.

Fuel

It is also important to check if there is enough fuel for the operation. Feller bunchers use diesel fuel to generate power. In most of the cases, the fuel is preferably to have cetane number greater than 50 (minimum 40). This is suitable when undergo operation for temperature below -20 °C (-4 °F) or elevations more than 1500m (5000 Ft.). The Cloud Point of the fuel is preferably at least 5 °C (9 °F) lower than the expected low temperature. It is also suggested that the sulphur content of the fuel should not be more than 0.5% as it could reduce 50% of the service interval for the engine oil and filter.

Older style felling head that uses a bar and chain to cut trees instead of the more modern saw disk.

Engine coolant

Operators have the responsibility to check the engine coolant level of the feller buncher before starting the engine. The coolant prevents cylinder linear erosion and pitting, and provides protection during extremely low temperature for up to -37 °C (-34 °F). It is recommended to use coolants for heavy-duty engines which are relatively low silicate ethylene glycol base. There are two forms of coolants: pre-diluted or concentrate. Water is required to dilute the concentrated coolant with an approximate ratio of 50:50. The use of supplemental coolant addictive might be also required in the concentrated coolant in order to provide protection against corrosion. Distilled, deionised, or demineralised water is suggested for mixing the concentrated coolant because when some water compositions mix with other substances could form a precipitate, causing damage or blockage in the engine.

Risk management approach

During maintenance, there are common working hazards related to two main areas: working environment and exhaust system. When working on the exhaust system, be aware of the hot components around the engine. Workers could wear personal protective equipment such as safety spectacles, heat-proof gloves and safety boots. When feller buncher is elevated for service or maintenance, falls from height might happen. Related injuries could be avoided by ensuring dryness of all the walking surface, wiping any oils or other liquid substances on the floor. Also, ensure the feller buncher is parked on a level and stable ground during maintenance. When getting in and out of the machinery, workers are suggested to use three point of contact with two hands holding the handrails and one foot on a step. It is also important to provide sufficient lighting for all the working sites at all time of service.

Safety

Logging is considered one of the most dangerous occupations. This is because many loggers are injured by the falling objects which are large in size and heavy. “Struck by object” is the most common injuries that reported in the logging industry due to the manual use of equipment during the logging procedures. There is evidence that using mechanized harvesting equipment could reduce the rate of “struck by” injuries. One study indicates that total injury claims could be reduced by 14.2%, while the “struck by” injuries could be reduced by 8.2%, when comparing the changes before and after the use of feller buncher. The significant decline in the number of “struck by” injuries after using the feller buncher in the logging companies supported the statement that using mechanized harvesting equipment could lessen overall injuries. The evidence also found that the rate of injuries in the logging companies without using feller bunchers had increased slightly throughout a period of time, increasing from 14.5% to 17.5%, in five years. In terms of trees fatality, areas with lower levels of mechanization in harvesting resulted in higher rate of trees fatality. For instance, in Eastern areas of the United States, research which compared the conventional and mechanized logging operations, indicated the number of injuries, when using the conventional approach, is three times greater than that of using the mechanized equipment such as a feller buncher. However, mechanized related injury could be raised accordingly, especially when performing machine maintenance or repair. These kinds of injuries could be serious and also costly.

Riverton, Utah

About Riverton, Utah

Riverton is a city in Salt Lake County, Utah, United States. It is part of the Salt Lake City, Utah Metropolitan Statistical Area. The population was 45,285 as of the 2020 census. Riverton is located in the rapidly growing southwestern corner of the Salt Lake Valley.

Bus Stops in Riverton, Utah to Truco Services, Inc.

Bus Stop in Draper Station Riverton, Utah to Truco Services, Inc.

Bus Stop in Draper Station Riverton, Utah to Truco Services, Inc.

Bus Stop in 11400 S @ 930 W Riverton, Utah to Truco Services, Inc.

Bus Stop in Temple Drive @ 11055 S Riverton, Utah to Truco Services, Inc.

Bus Stop in 12600 S @ 1825 W Riverton, Utah to Truco Services, Inc.

Bus Stop in 12600 S @ 2191 W Riverton, Utah to Truco Services, Inc.

Bus Stop in 13400 S @ 2010 W Riverton, Utah to Truco Services, Inc.

Bus Stop in 12600 S @ 2685 W Riverton, Utah to Truco Services, Inc.

Bus Stop in 2700 w @ 12385 S Riverton, Utah to Truco Services, Inc.

Bus Stop in 11800 S @ 2812 W Riverton, Utah to Truco Services, Inc.

Bus Stop in 12600 S @ 2487 W Riverton, Utah to Truco Services, Inc.

Bus Stop in Redwood Rd @ 13324 S Riverton, Utah to Truco Services, Inc.

Map of Riverton, Utah

Driving Directions in Riverton, Utah to Truco Services, Inc.

Driving Directions from Supreme Tree Experts to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from DSI Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from SuperTrees Utah to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Transcendent Treecare to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Allmighty Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Rent A Monkey Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from MP Lawn Care and lighting LLC to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Millburn Lawn & Landscape to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Utah Tree Co to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Spruce Tree Service to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Hidden Oak Tree Care to 4640 Commerce Dr, Murray, UT 84107, USA

Driving Directions from Taylor's Tree Surgery to 4640 Commerce Dr, Murray, UT 84107, USA

Reviews for Truco Services, Inc. Riverton, Utah

Truco Services, Inc. Reviews

Marissa Burton

starstarstarstarstar (5)

TruCo is a great company to work with for your commercial landscaping and snow removal needs! Rob is excellent to work with. He is very timely in providing quotes and has a lot of great feedback and suggestions to provide on what will look great, fit within your budget, and is knowledgeable on plants that will thrive with Utah's ever changing weather conditions. I have been impressed with TruCo's landscape maintenance as well as landscape projects which have had a quick turnaround time. I would highly recommend using TruCo!

Truco Services, Inc. Reviews

Yvonne Olson

starstarstarstarstar (5)

I experienced excellent all around service from landscape improvement design, scheduling and professional installation completed within the timeline we discussed. Rob, the manager does an excellent job of communicating, overseeing the install crew and making sure his customers are 100% satisfied with the job. Highly recommend TruCo for all landscaping needs.

Truco Services, Inc. Reviews

Raymond Ferraro

starstarstarstarstar (5)

Michael the tree guy is so smart.  He knows all about tree removal, cutting and tree trimming services.  Truco did amazing work for me.  We had 16 very old and mature trees removed. The Truco team showed up on time ready to get the job done.  They did amazing with clean up truly respect your property and your life.  Communication was really good.  They needed to move some things to get the stump grinder to our yard they put things back with no issues.  Extremely professional and truly know what they're doing.  If anyone is looking for professional tree removal or tree service you really should call Jason or Michael at Truco.

Truco Services, Inc. Reviews

Heather Whiting

starstarstarstarstar (5)

We hired TruCo to do a new install of sprinklers, sod, spigot, and bury downspouts. We even have a wifi transmitter for our control box we can access from an app on our phones! We absolutely love the professionalism and quality of their work!! Our sales rep Pete was the best to work with, we highly recommend him to anyone in the market for landscaping. It was awesome seeing the finished results and we're incredibly excited to enjoy our new space!

Truco Services, Inc. Reviews

Jan Merideth

starstarstarstarstar (5)

TruCo installed all of our plants, trees and shrubs, drip lines, and boulders. Then they installed our amazing beautiful firepit. We loved the results and they guarantee all plants and trees up to a year. They were great and easy to work with. They listened to our needs and wants and met them 100%. Our HOA sent us a letter telling us they appreciate all the work and the way our yard looks and let us know we added value to the property. Win/Win